wvc11b can't remote connect

[galen13]

I have a linksys wvc11b and set it up through their service but can not get the remote access to work. When i go to the url I get a screen redirecting me to the dynamic ip address. but IE gives an error message saying it can't load page.

any ideas

[ACE]

I had trouble setting up my cams to be accessed over the net.

Do you get the login prompt for the cam?
_________________
- - - - - - -
ACE

[galen13]

i can't get to the login. IE errors saying it can not load page. I have checked the ports and port forwarding. I can get in using the ip address. I spent an hour with linksys tech support and got no where.

[ACE]

So you can access the camera over the web by using the IP address? if it is this is an issue with your ddns domain.

If is not the problem see if you are forwarding all the ports. some cameras have more than one port to forward
_________________
- - - - - - -
ACE

[galen13]

according to the documentation it is just a single port. I used the default port and even changed it to different port to see if it made a difference

[ACE]

alright

well can you access it by just using the ip address and not the ddns domain?
_________________
- - - - - - -
ACE

[galen13]

if i key the ip address from any pc on the network. I can access it

[ACE]

try changing the port to 80 and then try accessing it with your internet provided ip
_________________
- - - - - - -
ACE

[Administrator]

Is your router running a firewall? This could potentially block the camera from being viewed remotely.
_________________
Administrator
NetworkCameraReviews.com
www.networkcamerareviews.com

[efcstats]

were you ever able to make this work remotely?
_________________
DAR