works for a day or so then only gets 1 of 3 cameras

[comme]

I have 3 ip cameras on my network. We have Engenius (3) 2610; great little radio, The one at the main house is set to AP the other 2 are Client/Bridge. Ip's are 192.168.1.2, .3, .4 respectively. We set them up on a router and the range for all new comers are 192.168.1.10 - 192.168.1.50 sub=255.255.255.10; everything is great for about a day, then they lose the two farther cameras, and it will only pull up the first camera when we go to refresh. My son goes out and reconfigures the system; again its great for a day or so then right back to the same old CRAP. WHAT THE H---- GIVES. Please any help would be greatly appreciated.

[sadik007]

This is network problem, not cams...
Get program line Netscanner which scans IPs on your network..
http://www.softperfect.com/products/networkscanner/

you are loosing sync between stations.. probably..