Connectors?

[cjrautmann]

Hi, all.
I'm trying to modify a cheap internet camera (so cheap I can't even find a brand name on it) to work in a remote operated vehicle/remote control submarine.
Well, due to the constraints of making everything fit inside a 4 inch tube, I had to disassemble it and make some modifications so the camera would still pan and tilt, but there are some issues with wire lengths.
I've got to extend two wire harnesses with the same kind of connector on the end. However, everybody I've talked to (including Digikey) and they don't have anything like it.
The dimensions are as follows.
fifteen pin, single row
20mm x 3.5mm x 3.5mm
Pin pitch looks to be 1.25mm.

Since I'm looking to extend these, I'd need about 6-10 inches of wire, and a male and female connector on each end.
Anybody have any ideas?
Thanks for your help in advance!
CJ

[sadik007]

post pictures..

consider soldering directly to back of board ( I did this for some old Laptop screen cable)

[itsokrelax]

I would think instead of using a connector you could just solder as well.
_________________
I can record your video remotely. PM for details.
Favorite iPhone viewing apps:
Live Cams - http://tinyurl.com/yaby9ha
IPVision - http://tinyurl.com/y8allak

[ozarkdude]

Before you mess it up, I would contact American Connectors they are in Miami, Florida. They deal with military type connectors and special connectors. Connectors that you won't find at Digikey or Jameco.
Their phone number: 305-591-7530
Good luck

[sadik007]

or try

http://www1.conrad-uk.com/scripts/wgate/zcop_uk/~flN0YXRlPTM2NjE2ODkwMg==?~template=pcat_area&p_load_area=SHOP_AREA_14739