|
| Author |
Message |
black6spdz
New Member
Joined: 21 Sep 2007
Posts: 1
|
 Posted: Fri Sep 21, 2007 5:24 pm Post subject: help with Panasonic BL-C10A |
 |
|
|
Well I have a BL-C10A that is not working correctly. I have pressed the reset button numerous times to no avail. The light blinks orange as it goes through its calibration, then blinks green and finally goes solid indicating a succesfull IP from the DHCP server. I can confirm this by scanning the network and then pinging that IP. Once the lightgoes solid green the pings only last for about 20 seconds and then stops responding until I reset it and this process starts over again. During the 20 seconds it does respond I cannot open the web page. I'm not sure what is going on with this thing, I'm asuming a bad firmware update or something, just how I got it. Since I cannot load the page to perform a firmware update I thought I might try to use the Setup CD.. only problem is I threw it and the box out last week.. bummer. Can anyone send me the setup utility or an iso of the setup cd? Any other ideas? Thanks!
|
|
| Back to top |
|
 |
Josh
Expert
Joined: 31 Jul 2006
Posts: 132
Location: Beaverton, OR
|
| Posted: Fri Sep 21, 2007 7:00 pm Post subject: |
|
|
black6spdz,
PM me your e-mail address and I will send you the setup utility. If you cannot accept attachments 3MB in size, let me know and I will host the download for you
_________________
Support Engineer
Milestone Systems Inc.
|
|
| Back to top |
|
|
danburi
New Member
Joined: 15 Nov 2007
Posts: 2
Location: San Antonio, TX
|
| Posted: Thu Nov 15, 2007 12:57 am Post subject: |
|
|
| Josh wrote: | black6spdz,
PM me your e-mail address and I will send you the setup utility. If you cannot accept attachments 3MB in size, let me know and I will host the download for you |
Would you mind helping me out with the same utility? We recently moved and lost one of our software boxes in the shuffle and this is something I do need to get up and running again. Many thanks in advance - PM coming your way.
|
|
| Back to top |
|
|
joergermeister
New Member
Joined: 04 Dec 2007
Posts: 3
|
| Posted: Tue Dec 04, 2007 1:51 pm Post subject: Help |
|
|
I also have a panasonic blc10a and need setup software. Recently had a breakin but cought them on the cam. they did not get the cam but got my entire software collection and sold it before i could get it back. there went alot of money!!32@#@$@
Is there a chance of getting that sofware from anyone. Have been looking for a while now.
thanks in advance, JP
|
|
| Back to top |
|
|
Dwayne
Enthusiast
Joined: 10 Sep 2007
Posts: 335
|
|
| Back to top |
|
|
joergermeister
New Member
Joined: 04 Dec 2007
Posts: 3
|
| Posted: Tue Dec 04, 2007 4:28 pm Post subject: panasonic flash update and software v1.25 bin file |
|
|
how do i burn or use this bin file. I have tried using several burning softwares. There is also a flash update. How do i install it.
I just cant seem to find info or instructions on flash update or software.
thanks again in advance, JP
|
|
| Back to top |
|
|
danburi
New Member
Joined: 15 Nov 2007
Posts: 2
Location: San Antonio, TX
|
| Posted: Thu Dec 06, 2007 1:37 am Post subject: Getting the .bin file to run |
|
|
Thanks for pointing out the download site for the bin file for the BL C10. But I'm in the same situation - how exactly do I get this to run so the software loads and I can see my camera on the network again? 
Thanks in advance for the help!
|
|
| Back to top |
|
|
joergermeister
New Member
Joined: 04 Dec 2007
Posts: 3
|
| Posted: Fri Dec 07, 2007 12:46 pm Post subject: blc10a update |
|
|
http://www.netcamdealer.com/resources
This is the place for downloading exe files. The bin file is a flash update that that upgrades your cam and it can only be installed from cammera when loged in.
to access cam 192.168.1.253 or 192.168.0.253. You dont need the setup software to access cam.
|
|
| Back to top |
|
|
dude13333333
New Member
Joined: 28 Jan 2008
Posts: 3
|
| Posted: Mon Jan 28, 2008 8:22 pm Post subject: |
|
|
|
I can't figure out how to add the zoom functionality. I have downloaded the 1.25 firmware and installed it twice, like it says to do for that function, but it hasn't shown up on the cameras page. Also, how do I set it so it can be accessed via the internet rather than just locally?
|
|
| Back to top |
|
|
santhosh
New Member
Joined: 21 Jan 2008
Posts: 3
|
| Posted: Tue Feb 12, 2008 7:23 pm Post subject: |
|
|
| dude13333333 wrote: | | I can't figure out how to add the zoom functionality. I have downloaded the 1.25 firmware and installed it twice, like it says to do for that function, but it hasn't shown up on the cameras page. Also, how do I set it so it can be accessed via the internet rather than just locally? |
DMZ Host IP Address inside your router should be enabled and enter the ipd address of the camera. This will solve the internet access problem
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
