|
| Author |
Message |
navin_bvr
Member
Joined: 14 Sep 2008
Posts: 10
|
 Posted: Sun Sep 14, 2008 12:06 pm Post subject: Help me to get my IP cam on Internet...pleaseeee |
 |
|
Hello All,
I'm newbie in this forum. I would like to have a solutions from all u experties...
I have a DLink DCS 5610 IP cam and its installed in one of our remote office. I have installed as per the user manual shows.
My Concern is; I canot get my Camera on Internet, I can get it in local LAN and its working very fine.
I have setup the DDns with DynDns.org and have forwarded port in my router for the camera ip 192.168.1.70.
My camera Ip is: 192.168.1.70
My Router ip is : 192.168.1.1
Forwarded port: 80
DDNS: DynDns.org
http://xxxxxxxx.dyndns.org:80/
Please help...thanks in advance
|
|
| Back to top |
|
 |
kermitfrog
Member
Joined: 04 Sep 2007
Posts: 24
|
| Posted: Sun Sep 14, 2008 4:07 pm Post subject: |
|
|
Hi,
From where are you trying to connect to xxxx.dyndns.org?
From you computer which is inside the same network as your camera?
In this case maybe your router makes a problem and does not
allow this sort of "out-in-connection". Ask a friend to try to connect...
Kermit
|
|
| Back to top |
|
|
navin_bvr
Member
Joined: 14 Sep 2008
Posts: 10
|
| Posted: Mon Sep 15, 2008 2:44 am Post subject: Re: |
|
|
Dear.... I tried from outside my LAN, http://xxxxx.dyndns.org is a DDNS where i register my Dynamic IP address of company Internet. I can access inside my LAN.
I think my router is not letting me portforwarding, but in router configuration i can see the ports forwarded, abut if i try from www.canyouseeme.org it shows the port is blocked.
I'm confused and waiting for solution....
thanks...
|
|
| Back to top |
|
|
navin_bvr
Member
Joined: 14 Sep 2008
Posts: 10
|
| Posted: Mon Sep 15, 2008 7:31 am Post subject: |
|
|
FIXED.....
thanks for your support
|
|
| Back to top |
|
|
dcblair
New Member
Joined: 15 Sep 2008
Posts: 2
|
| Posted: Mon Sep 15, 2008 9:30 pm Post subject: Help please |
|
|
| navin_bvr wrote: | FIXED.....
thanks for your support |
Hi could you please tell me how you managed to fix this? I have a similar problem.
|
|
| Back to top |
|
|
navin_bvr
Member
Joined: 14 Sep 2008
Posts: 10
|
| Posted: Tue Sep 16, 2008 2:13 pm Post subject: |
|
|
It was a small setting i have done in my web cam viewable page on internet.
Go to Client Setup on left side menu,
Change the protocol options to HTTP
it will work
|
|
| Back to top |
|
|
|
IP Cameras 
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
