|
|
 |
Axis 207W Wireless IP Network Camera
|
207W Forum Posts - Pre-Sales Questions and Post-Sales Support
Below are a list of posts containing sales and support questions. These have been taken from the NetworkCameraReviews.com Forums. If your question is not
found, please feel free to register on our forums to find the answers you need. You can
register for an account here.
Axis 207W vs Panasonic BL-C131A
I'm doing some research on Wireless IP cams and came across the two in the subject line. My main purpose for the camera is to be able to monitor our cats while we are out of town. We have a pet sitter that stops by twice a day, but it would be nice to be able to check in on them.
I have not e...
Axis 207W, feed to Ustream/Mogulus
Hi everyone
I'm just wondering if there's any options for us to stream the video/audio from our Axis 207W to services like Ustream/Mogulus?
Obviously we would need a computer re-encoding/uploading, but has anyone managed to do this?
Thanks, Ben...
Axis 207W, video stream to website
Hi guys
I'm new to all this live streaming stuff but we've bought 2 Axis 207W cameras so we can FTP images every 5-10 seconds to our web server.
But I started thinking about actual video streaming.
I'm not too comfortable with the idea of users directly accessing the stream from the camera. 10 ...
Axis 207W - viewing over WAN issue
Hi, I have an Axis 207W that I have setup wirelessly on my network. My router is a WRT54GS with DD-WRTv24 firmware and an IP of 192.168.1.1. I have a dyndns.org account setup and it is configured properly because I can access my router from the WAN side. My camera has a static IP of 192.168.1.123...
Axis 207w keep dropping off the network
Hi,
Been struggling with this problem for a long time, with no solution from Axis.
I have 3 Axis 207w's and 1 Axis 221. The 207w cameras are wirelessly connected to a DLINK DIR-655 router (802.11G) and the 221 is directly wired to the same router. The 207w's are fairly close proximity to the ...
Axis 207w Cam and Live streaming on Specific Target
Hallo,
I am working on Live video Streaming on specific target. I need to do live video streaming on Siemens OpenStage 60 Phone.
[b:40c1728bf0]Capture Device[/b:40c1728bf0]: Axis 207w Camera [Support RealPlayer 10.5 and later or QuickTime 6.5.1 or later]
[b:40c1728bf0]Target Device[/b:40c1728...
207W - Delay between motion event captures
There seems to be a delay of a minute or two between motion event based captures with my camera. It is update to the latest version but has always had this problem. The camera is set to FTP a mp4 video with sound of about 12 seconds when motion occurs (6s before 6s after). It uses 640x480 images wit...
Axis 207W Internet viewing
Hi
I hope someone can help me as I am completely and totally confused about my Axis 207W camera.
It has been set up previously at a site to view over the internet, but now I have moved it to a different location and the camera was also reset.
How can I get this thing to work over the internet?I...
Axis 207W watching MPEG4 in Quicktime
I am trying to view my camera from a public computer. The Axis 207W camera has an option where MPEG4 can be viewed in Quicktime. When I access my camera, the Quicktime image with the large Q comes up and it says "connecting" then after about 10 seconds it says "10061 Disconnected.&...
Axis 207W - view without installing activex
I'm trying to view my camera from work, but don't have administrator rights to download activex. I've read somewhere that it can be viewed on windows media player, but haven't found any instructions on how to do this. Does anyone know how to do this, or any other alternatives?...
Axis 207W can't connect over internet
I have DSL internet service, so I have a Dynamic IP address. I set up the camera with a static IP that is acceptable by the Linksys WRT54G router. I set up Port Forwarding for Port 80. I set up an account on dyndns.org and set up the DNS notification feature on the Linksys. So everything is set ...
Multiple 207w IP Cams at one location
I was researching an axis 213ptz for my home in fla, (to serve as both a security and webcam), but have now migrated to the idea of several 207w IP cams instead. I'm currently using 2 cctv security cams into 2.4ghz tx/rx links to a cheap 2 channel video server to be viewed remotely. My goal now is t...
D-Link DCS 950 vs. Axis 207W
Which one is better? Video quality and sound quality. The specs are almost the same, but the D-Link is half the price. Also, what brand of router would you recommend?
I have a pet Parrot at home and want to use it to monitor him while I am away or on vacation....
Axis 207W - Motion Detection - not sending e-mail alert
I have a 207W camera. I'm very happy with it. When I first installed it the motion detector was working fine and sending e-mail notifications. A week later it stoped working and I can not get it to send me an e-mail notification with the attachement (video file). The test e-mail works fine. So I kno...
Please help - cannot access Axis 207w from internet (Belkin)
Hello,
Recently I have purchased an Axis 207w network camera. I hooked it up to my Belkin F5D9630AU4A wireless ADSL modem/router. Within the network everything works fine. I can access the camera without problems. I can also ping all the networklocations. My conputer runs on Windows XP.
In t...
Turning on a lamp with a 207W?
The I/O terminal pins -
Does anyone know what cable/equipment I would be needed to get a 207W to be able to turn on a household table lamp?...
Problem with Axis 207W
Hi,
A friend of mine gave me the axis 207w camera.
I've read the installation guide, but I can't find a way to bring the camera to the default settings. I tried the procedure described in the datasheets (Disconnect the power, press the button and connect the power again, release the button aft...
Axis firmware update to 4.40.1 (1 Oct 2007) 207w 207mw ...
RELEASE 4.40.1
==============
Products affected: AXIS 207MW Network Camera
Release date: 2007-10-01
Release type: Production
Firmware version: 4.40.1
File name: axis207mw.bin
Preceding release: 4.40
Products affected: AXIS 207W Network Camera
Release date: 2007...
Axis 207W event trigger not recording
We have a few Axis 207W's all pointed toward an ftp server on the same network (different usernames for each camera). One issue I've found with them is getting the motion detection to work is really hit or miss. I've setup two cameras exactly the same way and one works and one doesn't. Sometimes ...
Trendnet TV-IP301W or Axis 207W
I would like to set up a wireless IP camera in the nursery to view the baby from work and from my home office. I would like to be able to hear the baby and see her in low light conditions like when she is sleeping. Price is not as much an issue as quality.
Also, I am a Mac user and need to make s...
axis 207w is accessible but no video via internet
Hi, i was able to access axis 207w via both LAN and Internet. There is video (motion video) on LAN but not on internet. Please help. thanks...
axis 207w demo & questions
hi, i am thinking to purchase this camera. does anyone know if a Live demo is available for this camera?
i read in other post that it can use 4 AA batteries. How long will it last on 4 AA?
thanks...
Axis 207W
Hi,
I have got a Axis 207 W with Firmware 4.40. Is it possible to get this camera doing a snapshot / image (one in the morning for a certain time and one in the evening for a certain time) and got this photos to a webspace using ftp ?
I know there is a possibility in System Options / Advanced/...
Axis 207W parts
I Picked up a Axis 206 on eBay a few months back it worked great then i added the trial of their DVR software to the unit and i loved it. (until i figured the archiving wasn't working properly.) I explain this to my uncle and he purchases a Axis 207W for me on eBay as a gift but it arrives withou...
Axis 207W -- need help accessing Internet monitoring
I just purchased the Axis 207w wireless network cam and I'm having much difficulty setting it up for remote/internet monitoring. I was able to get the cam working wirelessly with my router (Belkin F5D7230-4) and I can get local access over a LAN, but I've struggled for hours to get the port forwar...
207W access from RMP OK but need help with Mpeg4 via AMC
I'm new to ALL this: IP cam, networking, wireless etc... This forum has helped me a ton.
I have an Axis 207W connected at home and can view it from my office with Axis AMC viewer using JPEG (thus dropping packets due to bandwidth limitations) or I [u:82c5bf9474]can[/u:82c5bf9474] use Windows Real...
axis 207w and motion detecting recording software
Wondering if someone can suggest software to record video using an Axis 207W using motion detection?
I have Milestone Protect Professional but have yet to get it to work.
Is there any other software?
I want the software to store the video to a computer upon detecting motion.
Thanks for a...
Axis 207W
Ok, I spent twice the amount of my original budget but the Axis 207W is a very nice camera with great quality image and capabilities.
The initial set up is also very easy and 5 minutes after I opened the box the camera was working (wired).
However, in order to see the video over the WAN it was n...
Axis 207W Tunneling RTP over RTSP over HTTP
This is a repost of a previous topic but now I know a bit more about what to ask... I think.
The Axis 207 manual says it supports tunneling RTP over RTSP over HTTP to allow the cam to be viewed over a standard port 80 http connection. This is necessary to enable the cam to be viewed from behind ...
need advice
I finally get the Axis 207W last january and I installed it in a house I have in Argentina. I will resume this camera in just one word: superb. The camera is running, running, and running. Not a single problem, very easy configuration and most important, it is very reliable. In Argentina power inter...
Axis 207W or a Gadspot NC1000-W10??
Im needing a camera to be mounted near my front door that is undercover. Whats makes the Axis 207w better than the Gadspot NC1000-W10? Iv got the choice of these two cameras....
|
|
|
|
|
IP Cameras 
